When you’re not sure about your water quality, And when you drink water from a tap, It might not be safe for your health. Tap water contains different harmful bacteria. The presence of coliform bacteria, in particular E. coli, in drinking water raises the possibility that the water contains pathogens that can occasionally cause mortality as well as symptoms like fever, exhaustion, cramps, nausea, diarrhea, and headaches. To overcome this problem, water softeners play a crucial role in softening hard water and making it hygienic. You need direction about how to use a water softener. In this blog, you will get a brief guide to it.

Step-by-Step Instructions for Using a Water Softener:

• Choose the right spot.

Selecting an appropriate place for your plumbing water softener in your home is the first step. The ideal location is next to your home’s main water supply, but it should come before the heater. Usually, the crawlspace or basement serve as the primary water supply.

The water softening system requires more room since it is taller—between 54 and 68 inches—and has two tanks: one for salt and the other for resin. Additionally, confirm that a 110V–120V power source is located close to the water softener.

• Install a water softener.

After deciding on the ideal location, install a water softener. After installation, you’ll drink hygienic water. And your body feels fresh when you drink bacteria-free water. But proper installation is crucial. One of our highly skilled plumbers, with a wealth of in-house experience, completed this task. They provide top-notch services, and they are trained by the “Utah Water Systems” company.  

Proper installation of the water softener. Expand the lifespan of your installer. Proper installation killed 98% of the harmful bacteria. while improper installation is not able to provide you with 100% authentic water.  

• Test and modify the hardness level.

It’s crucial to test the hardness level of your water softener. You can use a water softener test kit to examine the hardness level. For hygienic and safe drinking water, the hardness level must ideally be under 300 mg/L (milligrams according to liter) of calcium carbonate. Water hardness is divided into classes: soft (0–60 mg/L), moderately hard (61–120 mg/L), hard (121–180 mg/L), and very hard (above 180 mg/L). While higher hardness levels do not necessarily make water dangerous, excessively hard water can cause scaling in pipes and appliances.

• Inspect for leaks.

Activate the cold water tap located in the sink closest to the softener. In order to activate the bypass, press the bypass valve inward while the water is running. Next, gradually open the main water line and run the water until a bubble-free flow is achieved.

 Reopen the bypass valve to allow water to return to the softener. Run hot water from your faucet for many minutes until a consistent flow occurs after approximately three minutes. Once the hot water has been turned off, switch back to the cold water and shut off that faucet as well. 

• Regular monitoring and maintenance.

In the final step, take into account monitoring and maintenance. It’s essential for maintaining performance. We can divide monitoring and maintenance into two main categories:.

• Check salt level: Regularly check the salt level of your brine tank. In a brine tank, the salt level should typically be maintained between ½ and ¼ full. The exact salt level is based on the tank size. 

Refill your tank with required salt on a daily basis. Minimum or exceeding level of salt. Both can decrease the efficiency of water softeners.

• Clean the brine tank if the salt level exceeds its actual level. It can be the cause of salt sludge or a salt bridge in the brine tank. To overcome this issue, inspect your tank once every 24 hours. If you notice any kind of salt bridge, then clean it thoroughly and refill the fresh salt. 

Closing Remarks:

 Everyone wants to live a healthy and long life. But a healthy life demands healthy food and drink. Some people think their tap water is clean, but they don’t know that tap water contains so many harmful toxins and bacteria that might be harmful for our health. In this situation, you need a water softener. Water softener is used to minimize the hardness level of water, and it removes magnesium and other more harmful bacteria from water. But it may be a stressful situation when you don’t know how to use a water softener in an appropriate way. For your help, we discussed above some instructions on the usage of water softener. You need to follow those important instructions. For the best installation, you can get a consultation from our qualified plumbers. We provide sustainable and the best plumbing services. If you’re willing to get in touch with us, visit our site at https://utahwatersystems.net/.